Location: Saskatchewan/Manitoba area Job Description Dealer Support: Review dealer concerns & work with company personnel or vendors, as needed; provide technical & service support for the dealers as needed; report regional activities, both fiscal and operational on a timely basis; Schedule dealer activities, i.e., regular dealer calls, open houses, trainings, etc. Training: Attend trainings as needed, regionally and in Omaha; assist in training dealer personnel, both regionally and in Omaha. ..... (continued)

Background Required: Bachelors Degree in Mineral Processing, Mining, Chemical or Metallurgy. 2+ years experience working with mineral processing equipment preferred. Mechanical aptitude a plus. Self starter personality. Ability to travel internationally. Must have either U.S. Citizenship or TN-1 Visa Responsibilities: Sales of technically advanced screening technology for the mining industry. Hands on problem solving with a mechanical aptitude. 25% Travel with some travel to international locations. ..... (continued)

Leavitt Machinery is one of North America’s largest Dealers for Materials Handling and Aerial equipment located in the Pacific Northwest. We sell, rent, lease, finance, service & supply parts for Caterpillar, Mitsubishi, Taylor and Manitou Forklifts as well as complementary product lines such as JLG Booms and Scissor Lifts, Comedil and Potain Cranes. As an equal opportunity employer with 17 locations in B.C., Alberta and Washington State, we are a market leader in the Materials Handling industry & we offer ..... (continued)

Responsibilities: -Lead a major/minor project discipline team from conceptual stage to detail design stage. -Able to plan, schedule and determine manpower for the project. -Prepare DBM, EDS, cost estimate and detail design of plant power distribution system. -Develop single line diagrams for HV/ MV/LV power distribution system. -Carry out engineering calculations and analysis for demand load, equipment sizing, voltage drop, motor starting, neutral grounding resistors (NGRs), and system power factor ..... (continued)

Responsibilities: -Senior electrical designer is required to design and draft drawings using computer drafting software -Design single line diagrams for plant MV/LV power distribution system. -Design substation layouts, grounding layouts, electrical equipment layouts, motor control schematics, control panel layouts, cable layouts, cable tray layouts, lighting layouts, area classification drawings, general plant layouts. -Prepare area classification drawings in conjunction with electrical engineer and other ..... (continued)

Qualifications: • Registered Professional Engineer in Alberta with APEGGA • Knowledgeable in CSA Z662 code and other supporting codes • Excellent knowledge of engineering requirements for oil and gas pipeline systems • Proficient in both spoken and written English • Has the ability to develop technical reports and documents with minimal supervision Responsibilities: • Working closely with other pipeline engineers and clients to complete conceptual and detailed design of onshore cross country pipelines ..... (continued)

Responsibilities: The Project Materials Coordinator is responsible for supporting our alliance team. Drawing on technical and mechanical experience, utilizing Supply Management tools, processes and strategies to coordinate and maintain 100% line-of-site on all procured project materials. Securing the on-time delivery of project materials from a multitude of sources. Providing commercial and technical expertise to the project team members. Specific Responsibilities: The Material & Equipment Coordinator is ..... (continued)

Responsibilities: -This is a project management and leadership position which requires the ability to lead and direct others in achieving project goals. -Company's projects need to achieve overall quality objectives which include: Safety, Environment, Cost, Schedule, Correct and Complete targets. This position has a strong front line influence on delivering project results and requires patience, persistence and great communication skills to achieve success. Qualifications: -At least 15 years of ..... (continued)

Responsibilities: -Our Project Management Group in Calgary is continuing to expand, and we're looking for a number of Intermediate and Senior Project Engineers. -These are project coordination and leadership positions which require the ability to lead and direct others in achieving project goals. In the company's projects need to achieve overall quality objectives which include: Safety, Environment, Cost, Schedule, Correct and Complete targets. -The positions have a strong front line influence on ..... (continued)

Responsibilities: -Provide leadership to a small team of Project Controls Specialists involved in major oil and gas projects, utilizing Primavera and company’s project controls tools -Work closely with Project Managers and Clients to ensure successful execution of large, complex projects. Qualifications: -10+ years of Project Controls experience within an EPC environment. -Demonstrated experience managing teams of 10+ people, strong leadership abilities. -Strong interpersonal and presentation skills ..... (continued)

Responsibilities: -10 Yrs Experience Preferred Process Engineering experience in oil refining industry with special emphasis on writing operating guidelines, plant operating and control philosophies and turndown criteria for Hydrotreaters. -The relevant hydrotreating experience should include, but be not limited to, gas oil, diesel and naphtha fixed-bed hydrotreaters licensed by uop. -Additional experience should include expert-level knowledge of associated utilities & miscellaneous support facilities ..... (continued)

Responsibilities: -Bitumen Froth Treatment Process Engineer having experience in Oil Sands related to all unit operations such as pumping, Solvent/ diluent heating/ recovery, Separation, Centrifuging, Filtration, etc. Experience in process studies, design and engineering involving simulations, heat & mass balances, calculations, equipment sizing, writing Process descriptions, start-up & Operating guides/manuals, in addition to PFD and P&ID development (system eng), SAFE Charts, process control description ..... (continued)

Responsibilities: -Water Treatment Specialist Process Engineer having experience in Oil industry related to all unit opertions such as pumping, oil water separation, deoiling, skimming, softening applicable to both raw and produced water. -Experience in water related process studies, design and engineering involving simulations, heat & mass balances (with special emphasis on water chemistry), calculations, equipment sizing, writing process descriptions, start-up & operating guides/manuals, in addition to ..... (continued)

Responsibilities: -A Process Engineer able to lead senior and intermediate engineers involved in refining and upgrading units such as Atmospheric, Vacuum and other licensed units such as hydrocracking, Cat cracking, hydrotreating, H2 and offsites. -Additional experience should include an expert-level of knowledge with respect to scope development, conceptualization, process selection and front end design and cost estimates at all levels in refining. -The duties will also involve guiding others to develop ..... (continued)

Responsibilities: -Heavy Oil Production Process design engineer having experience in SAGD related to all unit operations such as Heavy Oil gathering & well pads, Oil Separation & Treating, Deoiling, Produced Water Treating, Utilities and Offsites such as flare, storage and fuel supply systems, etc. -Experience in process studies, design and engineering involving simulations, heat & mass balances, calculations, equipment sizing, writing process descriptions, start-up & operating guides/manuals, in addition ..... (continued)

Responsibilities: The Controls Coordinator will be responsible for: -Contractual deliverables between Instrumentation and Controls Department and Main Automation Contractor (MAC) -Coordination of technical issues between I&C, MAC, and Client. Develop key control specifications and automation design notes for project as required. Qualifications: Detailed knowledge and experience with: -Fieldbus Design and segment loading and verification. -Function Block and Sequential Control Programming, HMI custom ..... (continued)

The candidates must be qualified to be registered as Professional Engineers in Alberta (within Canada would be acceptable). They must also have a proven knowledge and application of the CSA Z662

Position Overview: The successful candidate will be experienced with wireless technologies and specifically with an understanding of the technologies that reside in handsets and other wireless devices. The candidate will be a member of the Terminal Certification Lab and, as such, will test PCS/iDEN devices in wireless networks. This is done in the field using computer-controlled receivers and phones. The equipment collects both over-the-air messaging and RF data which can be reviewed and processed in the ..... (continued)

Position Overview: The successful candidate will be experienced with wireless technologies and specifically with an understanding of the application technologies that reside in mobile handsets and other wireless devices. The candidate should also be able to assess these technologies from the perspective of company business objectives and strategies, and not just a technical standpoint. The candidate will be a member of the Terminal Certification Lab and, as such, will develop, maintain and execute the ..... (continued)

Position Overview: The successful candidate will be experienced with wireless technologies and specifically with an understanding of the RF technologies that reside in handsets and other wireless devices. The candidate will be a member of the Terminal Certification Lab and, as such, will develop, maintain and execute the test plans pertaining to iDEN & CDMA Cell Site Emulators to assess the RF functionality of various devices. He/she will also contribute to the development of processes, methodologies, ..... (continued)